FAQ
To keep the electrodes working optimally, it is necessary to clean them manually at regular intervals. You can clean the electrode according the step-by-step plan below:
Step 1:
Switch off the saltwater system and remove the plug from the outlet
Step 2:
Unscrew the inlet and outlet on the inside of the pool. Put the (black) plugs in the openings
Step 3:
Disconnect the 2 hoses from the saltwater system (see figure 1-3)
Step 4:
Loosen the swivel of the titanium electrode and disconnect the titanium electrode plug (see figure 4)
Step 5:
Loosen the cell nut and remove the titanium electrode from the cell housing (see figure 5)
Step 6:
Place the titanium electrode in a container and pour cleaning vinegar/kitchen vinegar into the container until the titanium electrode is fully submerged. Allow the plates to soak for at least 1 hour. For severe deposits, an overnight soak is recommended. Then rinse the electrode under the tap or with a garden hose (see figure 6)
Step 7:
Put everything back together by going steps 3-6 in reverse order.
![](https://intexcompany.bg/wp-content/uploads/2023/05/swsd2-1.png)
![](https://intexcompany.bg/wp-content/uploads/2023/05/swsd2-2.png)
![](https://intexcompany.bg/wp-content/uploads/2023/05/swsd2-3.png)
![](https://intexcompany.bg/wp-content/uploads/2023/05/swsd2-4.png)
![](https://intexcompany.bg/wp-content/uploads/2023/05/swsd2-5.png)
![](https://intexcompany.bg/wp-content/uploads/2023/05/swsd2-6.png)